|
Windows Technical Help |
|
|
Windows Technical Help |
Making a simple terminal connection to WCNet with an IBM Compatible computer (This is the simplest connection, but it is a text-only interface)
There are many communication software packages available. Often communication software is included with a modem when it is purchased. The "Terminal" package included with Windows will also work. Modems are available from any computer retailer. Good-quality modems can be bought for less than $100. You can use your current telephone line to connect to WCNet.
If you already know how to use your modem and communications software, here are the communications settings for connecting to WCNet. For more detailed instructions, keep reading.
- Speed: 2400 to 56kbps, depending on the speed of your modemTo log on, follow the steps listed under the heading, "Once you are connected."
If you have not already done so, install your modem, following the instructions that came with it. Installing an internal modem requires opening up your computer. You may want to have your computer dealer, or a knowledgeable friend do this. If you are using an external modem, you will need to perform the following steps:
You can use any communications software, including the communications modules in multifunction software such as Microsoft Works, or the Terminal program included in Microsoft Windows. Follow the program's instructions to install the software on your computer's hard disk drive. If you are using a system with only floppy drives, make a backup copy of the communications software disk. Put the original in a safe place, and use the copy..
If you have difficulty copying files or installing the software, consult the manuals that came with your software.
You will need to enter some information in your communications program so that you can connect to WCNet. Your communications software may refer to this information as Communications Settings or Terminal Settings.
Almost all communications programs allow you to save this information so you do not have to enter it again. Now give your software the command to dial, using the settings you saved in the previous step.
If you get a busy signal, try again in a few minutes.
If you do not get a "Connect" message or a busy signal, there is a problem with your modem or with the communications settings in your software. Check your connections, make sure that the settings match those listed above, and try again.
The following messages will appear on your screen, prompting your to enter certain information.
-Items in bold type signify information on your screen.
-Items in italics signify data you are to enter.
press the "Return" key 4 times. The screen clears and the following appears
You may now explore WCNet. Using your cursor keys and the menus, you can try out the various services and information sources available.
You find your way around WCNet by using the arrow keys on your keyboard to move your cursor around. The items on your screen in bold type are called links. The link your cursor is on will appear in reverse video.
Move your cursor to the Electronic Mail link and press the Return key. This will bring you to the Pine electronic mail package where you can send and read electronic mail. The rest of WCNet works the same way. Links, in bold type, lead to other documents; the links in these documents in turn lead to others. If you ever get lost, type M to return to the main menu. The best way to learn how to use WCNet is to explore it, discovering where links lead, and by reading the help documents available on the system.
If your screen appears jumbled, press the R key to redraw your screen.
If you cannot connect, check that you have performed all the steps listed under "How to connect." Most problems are related to the communication settings you enter in your communications program; check the program's manual for help.
Please report problems with these pages to the Helpdesk pagemaster.
E-mail US